|
 Mechanical
|
|
|
|
| SN |
Master
Instruments |
Ranges |
Uncertainty |
| 1 |
Slip Gauge Gr. I/II |
0.5 to 100mm |
0.36 to 0.67 Micron |
| 2 |
Vernier Calipers |
0 - 600mm |
5.0 to 13.0 Microns |
| 3 |
Height Gauge |
0 - 600mm |
5.0 to 13.0 Microns |
| 4 |
Micrometer |
0 - 300mm |
1.0 to 4.0 Microns |
| 5 |
Depth Micrometer |
0 - 200mm |
1.0 to 3.0 Microns |
| 6 |
Dial Indicator (P/L) |
0.2 - 10mm |
0.40/1.25 Microns |
| 7 |
Dial Bore Gauge |
18-60mm |
0.40/1.25 Microns |
| 8 |
Passameter, Marameer |
All Types |
0.3 Micron |
| 9 |
Pin & Plug Gauges |
0 - 100mm |
1.0 Micron |
| 10 |
Snap Gauges |
0 - 100mm |
1.0 Micron |
| 11 |
Feeler Gauges |
All Types |
1.0 Micron |
| 12 |
Scale |
0 - 600mm |
284.0 Microns |
| 13 |
Measuring Tape |
0 - 5 Mtrs |
570.0 Microns |
| 14 |
Dial Calibration Tester |
0 - 10mm |
0.50 Micron |
| 15 |
Surface Plate * |
All Types |
1.00 Micron |
- Calibration is done through Software for Dial Calibration
Tester.
- Graphs of Peaks and Valleys on Surface Plate are done through
Software.
ANGULAR
MEASUREMENT
| SN |
Master Instruments |
Ranges |
Uncertainty |
| 1 |
Bevel Protractor |
0 - 360° |
18.15 Sec. |
| 2 |
Profile Projector * |
0 - 360° |
1 Min. 13.10 Secs. |
| 3 |
Combination Set |
0 - 180° |
30.0 Secs. |
| 4 |
Right Angle |
0 - 90° |
27.23 Secs |
| 5 |
Degree Protractor |
0 - 180° |
18.15 Secs | OTHER
MEASUREMENT
| SN |
Master Instruments |
Ranges |
Uncertainty |
| 1 |
Pressure Gauges |
1 to 700 Kg/Sqcm |
+/-(0.1%) | |
 clean,
calibrate and repair request
go to product
order
|
